Metric Taps and Dies

Special Reamers

Taylor Tool carries a wide variety of metric taps and dies. If you are having trouble finding the metric tap or die you are looking for, contact us by email (colleen@taylortool.ca) or by phone (519-658-9378) and we will find it for you.

Metric Taps, and Dies can be manufactured in any quantity from one piece to hundreds. As prices are based on the quantities ordered, please contact our order desk for a quotation of your needs. Standard industry assumes a 10% over/under shipment for specialty manufactured tools. If over/under shipments are not acceptable please advise us at time of quotation. When ordering metric taps, and dies, the more information we have will enable us to determine the correct tool for your application. Below is a list of information required to accurately quote.

metric tapWhen ordering Metric Taps we need:

  1. Size and Pitch of Thread
  2. Class of Fit or Gauge Tolerances
  3. Right or Left Hand
  4. Thread Form
  5. Lead - Single, Double etc.
  6. Type of Material to be threaded - Grade, hardness and machining properties are all helpful
  7. Type of hole to be threaded - Thru or Blind, if blind advise amount of clearance at bottom of hole
  8. Depth of hole to be threaded, indicate any reach if applicable
  9. Will Machine or Fixture affect the length of tap(s)
  10. Will tap pass through or back out
  11. Other features required: keyways, threaded shanks, oil holes, stepped shanks, hex drives etc.
  12. Submit drawings or prints if possible
  13. Coatings required: TiN, CrN, TiCN, Nitride, Steam Oxide etc.

When ordering Metric Dies we need:

  1. Size and Pitch of Thread
  2. Class of Fit or Gauge Tolerancesmetric dies
  3. Right or Left Hand
  4. Thread Form
  5. Lead - Single, Double etc.
  6. Material to be threaded
  7. Cutting New Threads or Rethreading existing threads
  8. Outside diameter & thickness of die
  9. Length of part to thread
  10. Special features which might affect die
  11. Drawing of part or dies if possible

To order metric taps or metric dies, contact us by email (colleen@taylortool.ca) or by phone (519-658-9378). You can also contact us using our web site form.

J. A. M. TAYLOR TOOL CO. LIMITED | 4 GOEBEL AVE. CAMBRIDGE, ON N3C 1Z1 | TEL: 519.658.9378 | FAX: 519.658.6799

taylor tool