Taylor
Tool carries a wide variety of cutting taps and dies. If you are having
trouble finding the cutting tap or die you are looking for, contact us by
email (colleen@taylortool.ca) or
by phone (519-658-9378) and we will find it for you.
Cutting Taps:
HAND TAPS: A general purpose (GP) tap that may be used by hand or in a production type machine. Available in a wide variety of H limits, number of flutes, machine screw, fractional, and metric sizes. May be used in a wide variety of materials and applications.
OVERSIZE HAND TAPS: Generally used when the work piece is to be plated afterwards, but can also be used when non-standard PD limits are required. Available in a wide variety of H limits, number of flutes, machine screw, fractional, and metric sizes.
SPIRAL POINT TAPS: Spiral Point taps are designed for thru hole applications. The spiral point pushes the chips forward and out the bottom of the hole, this helps to eliminate torn threads in the work piece. Spiral Point taps come in a wide variety of sizes including fractional, machine screw, and metric sizes; as well they come in optional numbers of flutes.
SPIRAL FLUTED TAPS: Designed for bottoming hole applications, the helical flutes provide a lifting action so the chips are pulled up thru the top of the hole, recommended for stringy ductile material. Available in fractional, metric, and machine screw sizes.
FLUTELESS
SPIRAL POINT TAPS: A Spiral Point Tap that does not have any flutes and is
designed for assembly work where there may be some misalignment between two
layers of material. They are extremely strong tools that resist breakage.
LEFT HAND TAPS: A general purpose (GP) tap that may be used by hand or in a production type machine. Available in a wide variety of H limits, number of flutes, machine screw, factrional, and metric sizes. May be used in a wide variety of materials and applications.
METRIC: A general purpose (GP) tap that may be used by hand or in a production type machine. Available in a wide variety of H limits, number of flutes, machine screw, fractional, and metric sizes. May be used in a wide variety of materials and applications.
TAPER/STRAIGHT PIPE TAPS: Normally used for pipefittings and couplings. The nominal size of the tap is that of the pipefitting and not the actual size of the tap. Pipe taps are also available with an interrupted thread that allows for better lubrication and lessens friction therefore making them ideal for tapping tough materials. They are also available with a spiral flute that makes them effective when tapping in a material that produces a long stringy chip; the spiral flute lifts the chip up and out of the hole being tapped.
TAP WRENCHES: Tap Wrenches are used to hold the taps by the square and to manually thread the part.
To order Cutting Taps, contact us by email (colleen@taylortool.ca) or by phone (519-658-9378). You can also contact us us using our web site form.
Cutting
Dies
ADJUSTABLE ROUND SPLIT: These are used for cutting external threads and are adjustable to cut smaller size threads. Available in machine screw, fractional, pipe, and metric sizes.
HEXAGONAL DIES: Normally used to repair rusty or damaged threads. Available in machine screw, fractional, pipe, and metric sizes.
SCREW EXTRACTORS: Used to remove broken screws, bolts and threaded products.
To order Cutting Dies, contact us by email (colleen@taylortool.ca) or by phone (519-658-9378). You can also contact us us using our web site form.
J. A. M. TAYLOR TOOL CO. LIMITED | 4 GOEBEL AVE. CAMBRIDGE, ON N3C 1Z1 | TEL: 519.658.9378 | FAX: 519.658.6799
